Instructions for The Use of Paddy Field Plow

Paddy field plow is a kind of agricultural machinery specially used for paddy field cultivation, usually pulled by a tractor or other power equipment, used to turn soil in the paddy field. The following are the instructions for the use of paddy plow:

1. Prepare

Equipment inspection: Before using the paddy field plow, first check whether the various parts of the plow are in good condition to ensure that there are no loose or damaged parts. In particular, check that the plow blade is sharp.

Power equipment connection: the paddy field plow is properly connected to the tractor or other power equipment, and ensure that the connection is firm. Ensure that the power of the power equipment is suitable for the specifications of the paddy field plow.

2. Adjust and set

- Plow depth adjustment: Adjust the plow depth according to the actual situation of the field. Generally speaking, the plow depth should be between 10-20 cm, and the specific depth can be adjusted according to the soil type and farming requirements.

- Blade Angle adjustment: Adjust the blade Angle according to the needs of the plow to ensure that the soil can be properly turned up and loosened.

- Wheel base adjustment: Ensure that the tractor wheel base matches the working width of the plow to ensure the uniformity and efficiency of farming.

3. Procedure

- Start power equipment: Start the tractor or power equipment and slowly drive it to the starting position of the field.

- Into tillage: Put the blade down, put it into working condition, and start plowing. When operating, the speed should be maintained at a constant speed to avoid being too fast or too slow.

- Observe the ploughing effect: During the ploughing process, always observe the ploughing effect to ensure that the soil is evenly turned up. If it is found that there are unturned areas or the plow blade does not penetrate into the soil, it should be adjusted immediately.

- Turn and wrap: When one end of the field is reached, slowly raise the plow blade and perform turn and wrap operations. Take care when turning to avoid damaging the equipment or affecting the ploughing effect.

4. Finishing touches

- End tillage: After finishing tillage, slowly lift the plow blade and turn off the power equipment.

- Equipment cleaning and maintenance: After the end of use, the paddy field plow should be cleaned, especially to remove dirt and weeds from the plow blade. Check the plow blade for wear, and sand or replace it if necessary.

- Storage: Store the paddy plow in a dry place to avoid rust or moisture. It is best to cover with a protective cover to prevent dust and moisture from entering.

5. Safety precautions

- During operation: Wear appropriate protective equipment such as gloves and work shoes during operation. Avoid standing near the plow blade to prevent accidental injury.

- Maintenance: When performing maintenance or adjustment, ensure that the power equipment is turned off and the paddy field plow is not in working condition.

Keep children away: Ensure that children or untrained personnel are kept away from the work area to avoid accidents.

6. Common problems and treatment

- The plow knife is not sharp: if the plow knife can not effectively turn the soil, it should be replaced or polished in time.

- Uneven plowing: It may be due to inconsistent plow depth or incorrect plow blade Angle, which needs to be re-adjusted.

- Insufficient power: If the tractor cannot drive the paddy field plow normally, it may be a lack of power or connection problem of the power equipment, which needs to be checked and solved.

Proper use and maintenance of paddy field plows can not only improve farming efficiency, but also extend the service life of equipment.

CONTACT NOW