Views: 0 Author: Site Editor Publish Time: 2024-11-08 Origin: Site
When using a power rake, it is important to ensure safe and efficient operation. Here are some key considerations:
1. Check before operation
Equipment inspection: Ensure that all parts and bolts of the power rake are securely fastened. Check the blade, chain, drive belt, etc. of the power rake for wear or damage.
Lubrication maintenance: Check the adequacy of oils such as lubricating oil, fuel oil and hydraulic oil, especially for equipment that has not been used for a long time.
Safety protection: Ensure that all safety protection devices are complete and effective, including protective covers.
Check the ground environment: Ensure that there are no hard objects such as large stones, metals, and plastics in the working area. Otherwise, the blades may be damaged or dangerous.
2. Precautions during operation
Speed and depth: Adjust the working depth and speed according to the geological conditions to avoid blade damage or machine overload. It is usually recommended to plow at a low speed and gradually increase the depth.
Control direction: Ensure that the running direction and walking route of the power rake are clear to avoid collision with obstacles or other equipment.
Work area cleaning: Avoid people standing or approaching in the work area to prevent accidents caused by accidental splashing or equipment failure.
Shutdown operation: If you need to adjust the tillage depth or remove obstacles, you must first turn off the engine and disconnect the power output to ensure safety before adjusting.
3. Deal with special situations
Encounter hard objects: If the power rake encounters hard obstacles (such as large rocks), stop the machine immediately to clean up and avoid blade damage.
Inclined terrain operation: When working on slopes, maintain a stable speed and avoid sharp turns to ensure the balance and safety of the equipment.
Prevent overheating of equipment: If you work for a long time, it is necessary to stop and rest timely to avoid overheating of the engine.
4. Maintain after operation
Clean the equipment: Clean the soil and debris on the blade and fuselage in time after operation to prevent equipment rust.
Check and replace wearing parts: Check the wear of blades and transmission parts regularly, and replace them in time as needed.
Storage environment: Keep it in a dry and ventilated place to avoid rain and sun exposure.
5. Precautions for operators
Wear protective equipment, such as safety shoes, gloves, goggles, etc., to prevent injury during operation.
Comply with the operation code: it is strictly prohibited to operate after drinking or fatigue, to ensure that the operator has sufficient attention and reaction ability.
According to the above precautions, the operation efficiency of the power rake can be effectively improved, the life of the equipment can be extended, and the possibility of accidents can be reduced.
