Corn Planter Instruction Manual

catalogue

1. Product introduction

2. Safety precautions

3. Make preparations before the operation

4. Procedure

5. Maintenance and maintenance

6. Common problems and solutions

7. Contact information

1. Product introduction

Corn seeder is a kind of agricultural machinery specially used for corn planting, which can achieve efficient and uniform sowing of corn and improve agricultural production efficiency. The seeder is suitable for all kinds of terrain, easy to operate and easy to maintain. Below are the product pictures :

2. Safety precautions

1. Read this manual carefully before operation to ensure correct use of the equipment.

2. Wear appropriate safety equipment, such as gloves, safety helmet and goggles.

3. Do not allow children or untrained personnel to operate the equipment.

4. Before repairing or adjusting the seeder, be sure to turn off the power source and ensure that the equipment stops running.

5. Avoid contact with rotating parts to prevent accidental injury.

3. Make preparations before the operation

1. Check the equipment: ensure that all parts of the seeder are intact, bolted, and the transmission system is normal.

2. Fill lubricating oil: Fill the appropriate amount of lubricating oil in the specified part according to the instructions.

3. Adjust the sowing amount: According to the required sowing amount, adjust the sowing depth and row spacing of the seeder.

4. Check seeds and fertilizers: ensure that the seeds and fertilizers used are free of impurities to avoid blocking the seeder.

4. Procedure

1. Start the tractor: Connect the planter to the tractor's suspension system and make sure the connection is secure.

2. Adjust the height of the planter: adjust the working height of the planter according to the terrain and crop needs.

3. Add seeds and fertilizer: Put the appropriate amount of seeds and fertilizer into the seed box and fertilizer box of the seeder.

Step 4 Start planting:

- Connect the power output shaft of the tractor to the transmission system of the planter.

- Start the tractor and slowly move forward to get the planter working.

- During the sowing process, maintain an even speed to ensure the uniform distribution of seeds and fertilizers.

5. Check the seeding effect: Check the seeding effect regularly to ensure that the seeds and fertilizers are evenly spread. If there is an anomaly, adjust the seeder in time.

5. Maintenance and maintenance

1. Clean the seeder: After each use, remove the soil, weeds and residual seeds or fertilizers from the seeder.

2. Check wearing parts: regularly check the wearing parts of the seeder, such as seed tray, transmission belt, etc., find wear and replace it in time.

3. Lubrication maintenance: According to the requirements of the manual, regularly fill lubricating oil at each lubrication point to maintain the normal operation of the equipment.

4. Storage precautions: When not used for a long time, the seeder should be stored in a dry and ventilated place to avoid moisture and rust.

6. Common problems and solutions

1. Uneven seeds: Check whether the sowing tray is blocked and clean up foreign bodies; Check whether the transmission system is normal.

2. Sowing depth is inconsistent: Adjust the depth adjustment device of the seeder to ensure that the sowing depth of each line is consistent.

3. Machine vibration: check whether the transmission parts are loose and tighten all bolts; Check that the tire pressure is normal.

4. Clogged seed box: Clean the debris in the seed box to ensure smooth seed flow.

7. Contact information

For technical support or after-sales service, please contact:

Company name: Grand Agricultural Machinery Co., LTD

Add: Tinghu District, Yancheng City, Jiangsu Province

Tel: Melody Liu +86 13390733120

Email: logan@shunyumachinery.com

Thank you for choosing our corn planter, I hope this product can bring convenience and benefit to your agricultural production. If you have any questions, please feel free to contact us.