Products
Home » Products » Rotary Cultivator » European And American Rotary Tiller » TMZ » Heavy Duty 3 Point Tiller for Tractor

Heavy Duty 3 Point Tiller for Tractor

The RX series rotary tiller is an efficient machinery designed specifically for agricultural cultivation, which can be used in conjunction with tractors. It has rotary tillage and ridging functions and is suitable for various soil conditions.
 
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Introduction

Working width: 180cm/210cm/230cm models are available to adapt to farmland operations of different sizes.


Power: It can be used with tractors from 45 to 100 horsepower to meet different power requirements.


Product Advantage


1. High efficiency design

Adopting advanced blade arrangement and rotary tillage technology to improve soil fragmentation efficiency, reduce soil compaction, and enhance crop growth environment.

The work width can be selected to meet the cultivation needs of different scales and improve work efficiency.


2. Strong adaptability

Suitable for various soil types, including clay, sandy soil, and loam, and suitable for the agricultural needs of different regions.

Can be used in conjunction with tractors with 45-100 horsepower, with a wide range of power matching.


3. Durable and sturdy

Made of high-strength steel to enhance wear resistance and extend service life.

The transmission system is stable and reliable, reducing failure rates and improving operational continuity.


4. Convenient adjustment

Equipped with adjustable sliders and tailboards, it is convenient to adjust the depth of cultivation and work effect, meeting the needs of different crop planting.

Some models are equipped with hydraulic lifting function, making operation more convenient.


Technical Parameters

Specifications Heavy duty rotary cultivator
TYPE GLD71TMZ GLD83TMZ GLD91TMZ
Working width(in.) 71" 83" 91"
Working width(cm) 180 210 230
Working depth(in.) 7 7 7
Blades/flange 8 9 10
Total blades 48 54 60
Side drive gear gear gear
Driveline protection slip clutch slip clutch slip clutch
Hitch cat I and II cat I and II cat I and II
PTO shaft series 6 6 6
PTO power required(HP) 45-55 60-80 85-100
Optimum PTO speed(RPM) 540 540 540
Rotor flange diameter(in.) 6.3 6.3 6.3
Rotor flange thickness(in.) 0.5 0.5 0.5
Approximate weight w/pto(lbs) 770 865 928
Size(mm) 2050*810*1025 2350*810*1025 2550*810*1025
Weight(kg) 350 392 422


Product Operate Guide


1. Preparation before startup

Check PTO speed: It is generally recommended to use 540 rpm (some models support 1000 rpm, please refer to the equipment manual for details).

Adjust rotary tillage depth: Set the appropriate tillage depth (usually 12-20cm) according to crop needs through slider adjustment or hydraulic control.

Choose the appropriate homework speed: too fast may lead to incomplete soil plowing, while too slow may affect work efficiency.


2. Start homework

Start the PTO in low gear and slowly lower the rotary tiller until the blades gradually touch the ground.

Keep moving forward at a steady speed, avoid sharp turns or sudden acceleration to prevent equipment damage.

When encountering harder soil or stones, the speed should be reduced and the depth of rotary tillage should be adjusted appropriately.

During continuous operation, stop the machine every 1-2 hours to check the temperature and lubrication of the blades and gearbox.


3. After the homework is completed

Turn off the PTO and lift the rotary tiller to lift the blades off the ground.

Gradually reduce the engine speed, then turn off the engine and disconnect the PTO drive shaft connection.

Remove dirt and weeds from the blades and body to prevent rusting and accumulation.



1. who are we?

We are based in Jiangsu, China, start from 2019, sell to Africa(60.00%), South America(30.00%), Domestic Market(10.00%). There are total about 11-50 people in our office.


2. how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.


3. What can you buy from us?

Kubota Rice Combine Harvester, Kubota Tractor, Rotary Cultivator, World Rice Combine Harvester, Rice Transplanters.


4. What's your Payment terms?

30% payment in advance by TT, 70% balance before delivery.


5. What services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, Express Delivery;

Accepted Payment Currency: USD, EUR, CNY;

Accepted Payment Type: T/T, L/C, Western Union, Cash;

Language Spoken: English, Chinese, Spanish

  +8618921887735
 +86-18921887735
 No.66 Hexin Road, Yandu District, Yancheng Jiangsu China

Quick Links

Product Category

Send Us A Message
Copyright © 2025 Jiangsu Grande Machinery Manufacturing Co., Ltd. All rights reserved. Sitemap Privacy Policy