Precautions for The Use of Paddy Field Weeding Plow

When using paddy field weeding plow, due to the special environment of paddy field, in order to ensure smooth and safe operation, special attention should be paid to the following matters:

1. Prepare for the operation

Equipment inspection: Check the blade, connecting parts and other key components of the weeding plow to ensure that they are not damaged or loose, that the blade is sharp and functional.

Lubrication and maintenance: Check the lubrication status of the equipment and add lubricating oil or hydraulic oil according to the instructions to ensure smooth operation.

Fuselage cleaning: the paddy field environment is wet and muddy. Clean the soil, grass clippings and other debris on the equipment to avoid affecting the performance of the equipment.

Paddy field survey: check obstacles such as stones and wood blocks in the field in advance to avoid damage to equipment during operation.

2. Precautions during operation

Control speed and depth: Adjust the depth and speed of ploughing according to the softness and hardness of the paddy soil to avoid too deep blade or uneven tillage. It is generally recommended to use low speed and uniform propulsion.

Equipment stability: the mud in the paddy field is slippery, which is easy to cause the equipment to slip. During operation, the equipment should be kept balanced and avoid swinging from side to side, so as not to affect the weeding effect.

Water level control: When operating, the field water level should not be too high or too low. The water level is generally maintained at about 2-3 cm, which can achieve the best weeding effect and reduce the resistance of the blade.

Avoid overload operation: If you encounter more grass or hard soil areas, you should slow down properly to avoid equipment overload operation and cause failure.

3. Deal with special situations

Encounter hard objects or tangled grass: If encountered tanaka large stones, roots or a large number of weeds entanglement, should be immediately shut down to clean up, to avoid damage or stuck blade.

Muddy area handling: When working in deep muddy areas, it may cause the equipment to sink. It is recommended to gradually lift the tool or steer around the operation.

Adjust the operation route: When doing long distance straight line operation in the field, keep the route straight to avoid repeatedly rolling the same area, so as to avoid excessive soil loose affecting the growth of crop roots.

4. Maintain after operation

Cleaning equipment: Immediately after the operation, clean the soil and grass clippings on the weeding plow, especially the blades and transmission parts, to prevent the mud from drying out and causing parts to wear or rust.

Inspection and maintenance: Check the wear and tear of the blades and transmission components, and sand or replace them if necessary to maintain the best weeding effect.

Storage environment: Store the device in a dry and ventilated place to prevent the device from rusting due to dampness. Use anti-rust agent to protect the blade when necessary.

5. Precautions for operators

Wear protective equipment: Operators should wear anti-skid boots, protective gloves, etc., to avoid falling or getting cut in slippery fields.

Observe safe operation: Maintain attention, avoid fatigue or drunken operation, to prevent accidents.

Familiar with the operation procedures: Before the operation, the instructions for the use of weeding plows should be carefully read, and the operation and adjustment should be carried out in strict accordance with the instructions to ensure safety.

Compliance with these precautions can effectively improve the efficiency and effect of paddy field weeding plows, reduce the failure rate of equipment, and ensure the safety of operators.