Views: 0 Author: Site Editor Publish Time: 2026-11-17 Origin: Site
A remote-control smart mower has to match the way your orchard is laid out and maintained. A 500mm wheeled machine, a 550mm tracked mower and an 800mm tracked flail mower solve different jobs. The useful differences are how each machine moves, what its deck cuts, how you set the cutting height and how you keep it powered during a shift. This guide compares four options from the GRANDEMAC intelligent lawn mower range and shows what to check before you shortlist a model.
Start with the machine's overall dimensions and turning space to check orchard access. Use cutting width to plan your passes.
Compare wheels and tracks against the surfaces the mower will cross, including row entrances and turns.
Choose a deck and height setting that match the grass you want to leave after mowing.
Compare pure-electric and hybrid models against the time available for charging or refueling.
Decide whether you need to maintain a single grass strip or mow most of the alley between trees. Then note how often the crew moves between blocks and whether those blocks need different cut heights. These decisions help narrow down the remote-control lawn mower range before you compare detailed specifications.
GRANDEMAC option | Configuration | When to shortlist it |
|---|---|---|
Four pneumatic tires and a fixed 45mm cutting height | You maintain a consistent target height and want to test a wheeled chassis on your lanes and access surfaces. | |
Rubber tracks and electric cutting-height adjustment from 10 to 150mm | You want a 550mm cut, need different height settings across blocks and have a practical place to recharge. | |
A 550mm cut, gasoline engine and onboard generator | You need a tracked machine with the same cutting width and want a fuel-based option for blocks farther from a charger. | |
A wider flail deck and hydraulic cutting-height adjustment from 10 to 280mm | You want wider coverage per pass and have room to enter, turn and line up for the next row. |
The 4WD wheeled model and the tracked models have different contact with the ground. Compare how each holds its line over your usual route. Include the transition from the access lane to the grass row, especially if tires or tracks cross ruts, loose ground or uneven edges. A demonstration on representative surfaces will tell you more about the match than a straight pass on flat ground.
Measure the gate opening, the narrowest clear point between trees and the usable turning space beyond the last tree. Include trellis posts, trunk guards and irrigation fittings that extend into the travel path. Cutting width describes the strip a mower cuts. For entry and turning, use the overall machine dimensions and the space the whole machine needs to line up with the next row.
Compare cutting width against the grass strip you actually maintain. For a wider alley, an 800mm deck can cover more ground per straight pass than a 550mm deck. Check how many passes each would need on your rows, including the overlap needed for an even cut. Also account for the time and space needed to turn at each end.
Then decide whether the job calls for one cut height or several. A fixed 45mm deck gives a crew one setting to work with on a consistent route. The 550mm electric mower adds electric height adjustment for blocks with different targets. The 800mm electric flail mower adds a wider deck and a broader hydraulic height range. Test the setting you plan to use on representative grass and ground.
Compare the 550mm pure-electric and 550A or 550B hybrid models if you want to keep the same cutting width. For the electric mower, map the time spent cutting, traveling between rows and returning to a charger. Ask the supplier to estimate runtime for your grass, terrain and working speed. If the crew rotates through blocks near a workshop, build recharge time into that schedule.
For a remote block, the gasoline engine and onboard generator on the 550A and 550B change how the crew plans each session. Review refueling and routine engine service alongside your expected mowing hours. The 550A has an enclosed cover and the 550B has an open bumper frame. Discuss which configuration fits your work and service routine.
Each machine in this comparison uses a handheld remote for operator control. Review where the operator will stand as the mower enters each row and where they can keep it in view near the turn. Trees and posts can block sightlines. Ask for a demonstration that shows low-speed steering through an entrance and the transition into the next row.
The right remote-control smart mower follows from the orchard job. Compare the chassis against the route, the deck against the grass strip and the power system against the shift. If different models fit different blocks, test the two closest options on the same route before choosing a machine for the whole orchard.
Compare GRANDEMAC Mowers for Your Orchard
Start by comparing the gate's smallest clear opening with each machine's overall working width. Send a photo of the approach if you need to enter at an angle. The supplier can review how much room each candidate needs to line up.
Yes. You use the handheld remote to steer between trees and line up for the next pass.
Consider a wider deck if you routinely mow most of the alley and can reduce the number of passes. Check that the complete machine can still enter, turn and reach the next lane.
Record whether the mower clears the tightest opening, how it lines up for the next row, the number of passes and the cut it leaves. Compare shortlisted machines on the same section using settings that reflect your routine.
It can if the chassis suits the route and the deck covers the range of cutting heights your crew uses. Check the most restrictive entrance and turn, then test the machine in a block with your typical grass conditions.