Views: 1 Author: Site Editor Publish Time: 2024-09-26 Origin: Site
Weeder is an important tool for rice field management. In order to ensure its good working condition and prolong its service life, reasonable maintenance and maintenance are very important. The following is the specific maintenance method of paddy field weeder:
1. Check and maintain before use
- Check fasteners: Regularly check whether the bolts, nuts and other fasteners of the machine are loose, especially whether the connection of the blades, bearings and transmission parts is firm. Loose parts may cause faults or safety hazards.
- Check tool status: Check whether the blade is sharp and intact. If the blade is seriously worn or there is a gap, it should be replaced or repaired in time to avoid affecting the weeding effect.
- Check the lubrication parts: check whether the lubricating oil is sufficient for the parts that need to be lubricated, such as the drive shaft, gears, bearings, etc., and add lubricating oil if necessary to ensure smooth operation.
- Check the power part: For power-driven mowers, check that the fuel tank, air filter and spark plug of the engine are working properly. Check that the amount of fuel and oil is sufficient and ensure that all systems are working properly before use.
2. Maintenance during use
- Avoid overload work: In weeding operations, try to avoid overload use of equipment. Prolonged overload may result in heat, increased wear or damage to the engine.
- Timely removal of entanglement: When working in the field, grass clippings, debris or rice roots may become entangled in tools and drive shafts. Should be regularly shut down for inspection, and timely clean up these debris, to prevent tool damage or affect the normal operation of the machine.
- Reasonable operation: Ensure that the operation procedures are used in accordance with the instructions, avoid too deep or too shallow operation, in order to achieve the best weeding effect and reduce the loss of the machine.
3. Cleaning and maintenance after use
- Clean the surface of the machine: After each use, the soil, grass clippings and rice residues on the surface of the machine should be cleaned with water or a brush in time, especially the blade and the transmission part, to prevent the residue from long-term adhesion leading to rust or affecting the performance.
- Drying treatment: After cleaning with water, the machine should be placed in a ventilated and dry place to dry to prevent rust in a humid environment, especially the metal part.
- Check the wear parts: After use, regularly check the wearing parts, such as blades, transmission belts and bearings and other parts of the wear is serious, found problems should be replaced in time.
4. Regular maintenance and maintenance
- Change the oil: if the machine has an engine part, change the oil regularly according to the frequency of use. Replacement is usually recommended every 20 hours or after one month of use to keep the engine well-lubricated and reduce wear and tear.
- Check the spark plug: the carbon deposit of the spark plug will affect the starting and performance of the engine, and should be removed regularly to clean up the carbon deposit, and replace the spark plug if necessary.
- Check the air filter: clean or replace the air filter regularly to ensure that the engine air intake is smooth and prevent dust and other debris from entering the engine and causing damage.
5. Long-term storage maintenance
- Drain fuel and oil: If the machine is not used for a long time, the fuel and oil should be drained to avoid fuel oxidation or oil deterioration leading to oil circuit blockage or corrosion of components.
- Storage environment selection: Storage should be selected in a dry and well-ventilated environment to avoid long-term exposure to damp or corrosive gases.
- Anti-rust treatment: For long-term storage of tools, especially tools and metal parts, it is recommended to apply a layer of anti-rust oil to prevent rust.
6. Rectify common faults
- Poor weeding effect: If the weeding effect is not ideal, it may be the blade passivation, the blade installation Angle is not correct, or the blade wear is serious. In this case, the blade should be trimmed or replaced in time.
- Unstable operation: If the machine is not running smoothly or there is abnormal noise, it may be bearing wear or loose transmission parts, should be stopped immediately for inspection and maintenance.
- Engine starting difficulty: If the engine is difficult to start, check whether the fuel is enough, whether the oil is within the normal range, whether the spark plug is carbon, and whether the air filter is blocked.
Sum up
Maintenance and maintenance of paddy field weeder can not only extend its service life, but also improve operational efficiency and reduce the occurrence of failures. Through the inspection before daily use, reasonable operation in use and timely cleaning and maintenance after use, it can ensure that the machinery is always in the best working condition and help farmers complete the paddy field weeding operation more efficiently.
