Products
Home » Products » Lawn Mower » Intelligent Lawn Mower » 1000mm Hybrid Gas-Electric Remote Control Crawler Lawn Mower | 22HP Loncin Engine, 50° Slope Mowing Robot for Orchard, Hillside & Farm

1000mm Hybrid Gas-Electric Remote Control Crawler Lawn Mower | 22HP Loncin Engine, 50° Slope Mowing Robot for Orchard, Hillside & Farm

22HP 1000mm hybrid gas-electric remote control crawler lawn mower with Loncin engine, 50° climbing angle, 500m remote range. Ideal tracked flail grass cutter for hillsides, orchards, farms and embankment mowing.
 
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Overview

This 1000mm hybrid crawler remote control lawn mower is built for tough slope, orchard and farm mowing work. Powered by a 22HP Loncin 608 four-stroke gasoline engine paired with a 2500W built-in self-generating system, it adopts gasoline-electric dual power generation design to eliminate pure-electric battery range anxiety. With heavy-duty engineering rubber tracks, this RC mower safely works on slopes up to 50 degrees. Operate remotely from up to 500 meters away to keep you out of risky steep terrain, flying debris and sharp branches. The cutting height is electrically adjustable from 1cm to 20cm, and the working efficiency reaches up to 4000㎡ per hour, ideal for large-area land maintenance.

Key Features

✅ Gas-Electric Hybrid Dual Generation System22HP Loncin 608 four-stroke gasoline engine + built-in 2500W generator. The engine charges batteries automatically while working, continuous long-hour operation without frequent charging stops. Equipped with two 24V 20.5A Chaowei batteries, stable power output for driving and cutting.

✅ 1000mm Wide Cutting Width & Electric Height Adjustment1000mm one-pass cutting width, covers more ground quickly. Electric adjustment of cutting height from 1cm to 20cm, easy to set ideal stubble height for different grass and crops.

✅ 50° Strong Climbing Capacity & Stable Rubber TracksHeavy engineering rubber tracks provide excellent grip on muddy, uneven, sloped ground. Safely mow slopes up to 50°, perfect for river banks, hillsides, terraced orchards and vineyards.

✅ 500M Long-Distance Remote Control, High/Low Speed Switchable500 meters remote control range. Supports high & low speed travel (0–4 km/h). Keep operators at a safe distance away from danger zones.

✅ Dual 1000W Split Drive TransmissionDual 1000W drive motors with split gearbox design, independent track control, flexible turning, strong torque for rough terrain.

✅ High Efficiency & Low Fuel ConsumptionMax working output up to 4000㎡/h. Max fuel consumption only 5.2L/h, 12L large fuel tank for long continuous working time.

Application Scenarios

  • Hillside, slope, river bank, embankment grass cutting

  • Orchard, vineyard, tea garden, farm weeding & mowing

  • Solar power station vegetation management

  • Wasteland reclamation, roadside green belt maintenance



场景


操作


Technical Parameters

Item Specification
Cutting Width 1000mm
Cutting Height 1cm–20cm (electric adjustment)
Power System Gasoline-electric hybrid, dual power generation, manual throttle
Engine 22HP Loncin 608 4-stroke gasoline engine
Built-in Generator 2500W
Drive Power Dual 1000W split transmission gearbox
Track Type Engineering rubber track
Built-in Battery 2pcs Chaowei 20.5A, 24V
Starter Battery 20.5A starter battery (standard)
Max Climbing Angle 50 degrees
Remote Control Range 500m, high & low speed adjustable
Travel Speed 0–4 km/h
Working Efficiency ≤4000㎡/h
Fuel Tank Capacity 12L
Max Fuel Consumption 5.2L/h
Overall Dimension 11001380580 mm
Net Weight 280kg


我们的优势打包


User Guide

⚠️ Important Safety Warnings

  1. Read the entire guide before operation. Improper operation may cause serious injury or machine damage.

  2. Max safe climbing angle: 50 degrees. Do NOT work on slopes steeper than 50°.

  3. When mowing slopes, mow along the contour (sideways), avoid going straight up & down steep slopes; avoid sudden turning, acceleration or stop on slopes.

  4. Keep hands, feet and clothes away from rotating blades and tracks during running.

  5. The remote control effective range is 500m (open area). Always keep the machine within sight.

  6. Do NOT operate indoors or in poorly ventilated places. Exhaust gas is toxic.

  7. Clear stones, branches, wires and hard debris from the working area before mowing to protect blades.

  8. Press the Emergency Stop Button immediately once abnormal noise, stuck blade or rollover risk occurs.

  9. Keep children and pets far away from the working zone. Do not carry passengers on the mower.

  10. Cut power and shut down the engine before cleaning, inspection or maintenance.

Pre-operation Check

  1. Place the mower on flat, stable ground.

  2. Check engine oil level, fuel level (use 92# unleaded gasoline). Fuel tank capacity: 12L.

  3. Check battery connection: 2 pcs 24V Chaowei 20.5A built-in batteries + starter battery.

  4. Inspect rubber tracks for cracks, wear and proper tension.

  5. Check cutting blades for bending, looseness or damage.

  6. Turn on the remote controller, confirm remote signal connection is normal.

Startup Steps

  1. Reset emergency stop switch (twist to release stop state).

  2. Turn throttle to proper position (manual throttle).

  3. Electric start the Loncin 608 four-stroke 22HP gasoline engine.

  4. Wait for engine warm-up (1–2 mins idle). The built-in 2500W generator starts self-charging automatically.

  5. Pair remote control, confirm communication link is successful.

  6. Adjust cutting height electrically (1cm–20cm) according to grass condition.

  7. Engage cutter blade, then control the crawler to move and start mowing.

Remote Controller Function Introduction

  • Left joystick: Forward / Backward / Turn

  • Right joystick: Blade deck lift & cutting height electric adjustment

  • Speed switch: High speed / Low speed (0–4 km/h)

  • Blade clutch button: Start / Stop cutting

  • Emergency stop button: Cut off power & shut engine urgently

  • Signal indicator: Shows remote connection status

✅ Normal Operation Tips

  1. Working efficiency up to 4000㎡/h. Overlap slightly for even mowing effect.

  2. Hybrid system: The gasoline engine drives cutting and charges batteries simultaneously, no frequent plug-in charging required.

  3. If grass is thick and heavy, use low speed for better cutting result and reduce blade load.

  4. If the cutter gets stuck by weeds/branches: Stop blade first, reverse the machine, clear debris before restarting.

  5. Keep the antenna of remote controller upright, avoid obstacles blocking the wireless signal.

Shutdown Steps

  1. Disengage cutting blades first.

  2. Drive the mower to flat safe ground.

  3. Set engine to idle speed and idle for 2–3 minutes for cooling.

  4. Turn off engine ignition.

  5. Turn off remote controller.

  6. Activate emergency stop for long-time parking.

Routine Maintenance Schedule 


Working Hours Maintenance Item
Every 10h Clean air filter, check track tension, clean grass residue under deck
First 15–20h First engine oil replacement
Every 70–100h Replace engine oil, check bolts, inspect blades, clean generator dust
Every 200h Replace air filter, check battery health, inspect gearbox lubrication
Seasonal storage Drain fuel, clean whole machine, store in dry shelter, disconnect batteries

❗ Troubleshooting 

  1. Engine fails to start

    • Check fuel, engine oil, starter battery power; confirm emergency stop is released.

  2. Remote no response

    • Check remote battery, re-pair signal, remove signal shielding obstacles.

  3. Blade cannot cut grass well

    • Sharpen or replace blunt blades; reduce travel speed for heavy weeds.

  4. Track slips on slope

    • Clean mud on rubber tracks; reduce working slope angle, avoid wet slippery ground.

  5. Battery not charging

    • Check built-in 2500W generator connection, check engine normal running status.

Storage 

Store the mower in dry, ventilated warehouse, away from rain and direct sunlight. Disconnect batteries if stored for more than 1 month.



首图卖点

FAQ

Q: How far can the remote control reach? 

A: Up to 500 meters in open space. 


Q: What’s the max slope it can work on? 

A: Up to 50 degrees, rubber tracks guarantee stable traction. 


Q: Is the cutting height adjustable? 

A: Yes, electric adjustment from 1cm to 20cm. 


Q: Does it charge itself while working? 

A: Yes, the 2500W built-in generator charges the batteries automatically during operation.


FAQ Style Copy

Q: What is the difference between GLD-52DH and GLD-52YK?

A: GLD-52DH supports satellite navigation and automatic path planning, while GLD-52YK is a remote control only model. Both share the same cutting width, power, and battery specifications.


Q: How long is the remote control distance?

A: The remote control distance is up to 100 meters in an open environment.


Q: Can it work on slopes?

A: Yes, the machine has a climbing ability of ≥ 20°, making it suitable for sloped lawns.


Q: What is the cutting height range?

A: The cutting height is adjustable from 2cm to 10cm.


Q: Is it suitable for large lawns?
A: Yes, with a 52cm cutting width and 3000 m²/h working efficiency, it is suitable for large gardens, villas, and public green areas.


  +8618921887735
 +86-18921887735 / +86-13365182967
 No.66 Hexin Road, Yandu District, Yancheng Jiangsu China

Quick Links

Product Category

Send Us A Message
Copyright © 2026 Jiangsu Grande Machinery Manufacturing Co., Ltd. All rights reserved. Sitemap |  Privacy Policy    苏ICP备2023030502号-2