Products
Home » Products » Lawn Mower » Intelligent Lawn Mower » Hybrid Gas-Electric RC Tracked Lawn Mower | 1000mm Cutting Width, 60° Slope Mowing Robot

Hybrid Gas-Electric RC Tracked Lawn Mower | 1000mm Cutting Width, 60° Slope Mowing Robot

This hybrid fuel-electric tracked remote control lawn mower adopts Loncin 608 four-stroke gasoline engine, with 1000mm cutting width, supports electric cutting height adjustment 1–20cm. It can climb up to 60° steep slope, 500m remote control distance, high & low speed switchable. Widely used for orchard, hillside, river embankment, green belt, farmland vegetation trimming. Track design offers great traction on muddy, uneven terrain, keep operators away from dangerous slopes.
 
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Overview

Tame Steep, Dangerous Slopes Safely — Remote Control Crawler Grass Cutter

Stop risking falls and injury trimming hillsides, embankments and orchard slopes. Our hybrid tracked remote control mower lets you cut grass from up to 500 meters away. Powerful Loncin engine, heavy-duty rubber tracks and electric height adjustment make tough overgrown vegetation work effortless.

Why Choose Our Hybrid RC Crawler Mower?

Traditional wheeled mowers cannot handle steep slopes, muddy or uneven ground, and manual slope cutting is extremely dangerous. This all-terrain tracked mower is built for landscapers, farmers, orchard owners, solar farm managers and municipal green teams.

✅ Hybrid Fuel-Electric Power SystemPowered by reliable Loncin 608 four-stroke gasoline engine (22/25/27 HP optional). The built-in 2500W generator continuously charges the 24V battery set. Hybrid design means you get long run time of gas power + convenient electric drive control, no frequent charging trouble.

✅ 60° Maximum Climbing Capacity, Unmatched TractionHeavy-duty widened 41# engineering rubber tracks spread weight evenly, deliver strong grip on slippery, muddy, steep terrain. It safely works on slopes up to 60 degrees where standard lawn mowers tip over.

✅ 500m Long-Range Wireless Remote ControlAdjust forward speed (0–6km/h), switch high/low speed, steer the machine remotely. Stand on safe flat ground while the robot handles risky slope trimming, eliminating falling, flying debris and blade injury hazards.

✅ 1000mm Cutting Width & Electric Height AdjustmentWide 1-meter cutting deck boosts productivity up to 6000㎡ per hour. Adjust cutting height electronically between 1cm to 20cm to suit lawn, thick weeds, brush and orchard undergrowth. No manual tool change for height setting.

✅ Dual Independent Drive TransmissionDual 1000W split transmission boxes enable flexible turning and stable movement. Paired with Chaowei 20.5Ah 24V battery pack and electric start, easy startup and reliable continuous operation.

Perfect For These Jobs

Orchard weed management 

️ Hillside, dam & river embankment clearing 

️ Highway and park green belt maintenance 

☀️ Solar farm underbrush cutting 

Farmland & pasture vegetation trimming

操作


坦克1000使用场景


Technical Parameters

Item Parameter
Cutting Width 1000mm
Cutting Height 1cm-20cm (electric adjustment)
Power Source Hybrid fuel-electric, dual power generation (manual throttle)
Engine Power 22/25/27 HP, gasoline
Engine Brand Loncin 608 four-stroke
Built-in Generator 2500W
Drive Power 1000W*2 split transmission
Drive Track 41 Widened Engineering Rubber Track
Built-in Battery 2pcs Chaowei 20.5A 24V + 1pc 20.5A starter battery
Start Mode Electric start
Max Climbing Angle 60 degrees
Remote Control 500m distance, high/low speed
Travel Speed 0-6km/h
Working Efficiency ≤6000㎡/h
Fuel Tank 12L
Oil Capacity 1.6L / 2.4L
Max Fuel Consumption 5.2L / 6.8L per hour
Overall Dimension 15501530700mm
Net Weight 340kg
Package Size 16501500870mm
Gross Weight 410kg


我们的优势坦克1000 (1)


User Manual — Hybrid Fuel-Electric Remote Control Crawler Lawn Mower

Spec: 1000mm cutting width, Loncin 608 4-stroke engine (22/25/27HP), max climbing angle 60°, 500m remote range

WARNING

This is professional slope mowing equipment. NOT for children to operate. Never start engine indoors, exhaust gas can cause poisoning. When working on slopes, operator must stay on the safe side at the top of slope, never stand downhill of the machine. Press emergency stop immediately in danger.

1. Pre-operation Inspection (Check every time before start)

  1. Fuel & Oil: Use 92# or higher unleaded gasoline. Check engine oil level by dipstick. Oil capacity:1.6L /2.4L. Do NOT start with insufficient oil. Fuel tank:12L, do not overfill.

  2. Battery: Confirm 2pcs 20.5A 24V Chaowei battery + starter battery well connected, no leakage. Check remote controller battery.

  3. Mechanical parts

    • Track: 41 widened engineering rubber track. Standard tension: sag 30–50mm. Clear stones and grass stuck in tracks.

    • Blades: Check blade bolts tight; replace cracked or bent blades.

    • Fasteners: Check all bolts of engine, cutting deck and gearbox.

  4. Site check: Remove stones, stumps, wire and debris. Do NOT work in heavy rain, strong wind, fog. Avoid extremely muddy ground to prevent rollover.

2. Starting Procedure

  1. Turn on main power switch on machine, power on remote controller. A “beep” sound means pairing successful. Max remote distance: 500m, obstacles reduce signal range.

  2. Make sure cutting blade clutch is OFF. Adjust manual throttle to medium-low position.

  3. Electric start: Press start button, each start ≤3–4 seconds. Wait 10 seconds before retry if failed.

  4. After engine starts, idle for 2–3 minutes for warm-up. Adjust throttle properly. The built-in 2500W generator charges 24V battery pack automatically.

  5. Remote controller functions

    • Left & right joystick: forward, backward, turn left / right

    • High / low speed switch: travel speed 0–6km/h

    • Deck lift button: electric cutting height adjustment from 1cm–20cm

    • Blade clutch switch: turn blades ON / OFF

    • Red emergency stop button: cut all power immediately

3. Operation Instructions

  1. Slope limit: Max climbing 60°. Work along contour line is recommended. Avoid long cross-slope travel. Reduce speed on steep slopes.

  2. Mowing tips: Use low speed for thick weeds, mow back and forth in several passes, avoid overloading. Suitable for orchard, solar farm, embankment.

  3. Hybrid system: Gasoline engine runs to generate electricity for drive motors & control system. Batteries provide peak power. No external charging required when fuel is available.

  4. Signal: Keep machine within line of sight. The machine will auto-stop once signal lost.

  5. Heat protection: After 1 hour heavy work, idle for cooling, clean grass debris on air filter.

4. Shut Down Steps

  1. Disengage blade clutch, wait blades fully stop

  2. Turn throttle to idle, idle 30s for cooling

  3. Turn off engine, then main power and remote controller

Do NOT refuel when engine is hot.

5. Maintenance Schedule

表格

Item Interval Note
Engine oil change 10h for first oil change; every 50h afterwards Use Loncin 4-stroke engine oil
Clean air filter Every 4–10h Replace after repeated cleaning
Clean deck, blades, tracks After each use Do NOT spray high-pressure water on electric box & motors
Adjust track tension Every 20h Sag 30–50mm, adjust by side bolts
Inspect blade bolts Before every use Replace damaged blades
Gearbox oil inspection Every 6 months 1000W*2 split transmission
Long time storage Drain fuel tank, disconnect starter battery, store in dry room

6. Troubleshooting

  • Fail to start: Low battery / oil protection / blocked fuel line / stop switch locked

  • Engine runs but no travel: Track jammed / loose track / loose motor plug

  • Deck height cannot adjust: Obstacle on electric push rod / low voltage

  • Low power & high fuel consumption: Clogged air filter, carbon deposit on spark plug

  • Remote control no response: Low remote battery, signal blocked, loose antenna

7. Forbidden Operations

❌ Touch rotating blades, belts or hot exhaust while running ❌ Stand downhill of the machine on slopes ❌ Cut thick branches and bushes beyond capacity ❌ Service blades without shutting down and cutting power ❌ Refuel gasoline while engine hot

✅Service

  • Support OEM & ODM

  • Factory direct supply, competitive price

  • CE certification available

  • One year warranty for core engine parts

  • Technical support & operation manual provided

卖点

FAQ

Q1: What is the remote range? 

A: Up to 500m in open space. Obstacles reduce range. Auto-stop when signal lost. 


Q2: Can it climb 60° slope? 

A: 60° is no-load max. Recommended ≤45° under mowing load. Mow along contour line. 


Q3: Does it need external charging? 

A: Self-generating hybrid system, no external charging. 12L fuel tank for continuous work. 


Q4: How to adjust cutting height? 

A: Electric adjustment via remote, 1–20cm. 


Q5: How to choose HP? 

A: 22HP for flat land & light grass. 25/27HP for steep slopes & heavy weeds. Q6: What fuel to use? A: 92#+ unleaded gasoline. Use Loncin 4-stroke engine oil.

FAQ Style Copy

Q: What is the difference between GLD-52DH and GLD-52YK?

A: GLD-52DH supports satellite navigation and automatic path planning, while GLD-52YK is a remote control only model. Both share the same cutting width, power, and battery specifications.


Q: How long is the remote control distance?

A: The remote control distance is up to 100 meters in an open environment.


Q: Can it work on slopes?

A: Yes, the machine has a climbing ability of ≥ 20°, making it suitable for sloped lawns.


Q: What is the cutting height range?

A: The cutting height is adjustable from 2cm to 10cm.


Q: Is it suitable for large lawns?
A: Yes, with a 52cm cutting width and 3000 m²/h working efficiency, it is suitable for large gardens, villas, and public green areas.


  +8618921887735
 +86-18921887735 / +86-13365182967
 No.66 Hexin Road, Yandu District, Yancheng Jiangsu China

Quick Links

Product Category

Send Us A Message
Copyright © 2026 Jiangsu Grande Machinery Manufacturing Co., Ltd. All rights reserved. Sitemap |  Privacy Policy    苏ICP备2023030502号-2