Products
Home » Products » Lawn Mower » Intelligent Lawn Mower » Tracked Remote Control Lawn Mower With Built-in Generator, 60° Climbing RC Crawler Grass Mowing Machine

Tracked Remote Control Lawn Mower With Built-in Generator, 60° Climbing RC Crawler Grass Mowing Machine

Hybrid gas-electric tracked remote control brush cutter, 1200mm double blades, 60° climbing for hillside, orchard and slope mowing.
 
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Introduction

This hybrid gas-electric tracked remote control lawn mower is a heavy-duty all-terrain brush cutter built for steep slopes, orchards, hillsides, riverbanks, farms and complex green belts. Powered by a Loncin 608 four-stroke gasoline engine with dual power generation system, paired with split dual drive motors and widened engineering rubber tracks, it can climb slopes up to 60 degrees safely.

Equipped with a 1200mm double-blade cutting deck, cutting height is electrically adjustable from 1cm to 20cm. Operate remotely from up to 500 meters away, away from steep, slippery and dangerous working areas. The built-in 2500W self-generator continuously supplies power for drive system and electric height adjustment. High working efficiency up to 7200 m² per hour, ideal for commercial landscaping contractors, orchard owners, farm maintenance and municipal greening projects.

Core Features

✅ Gas-Electric Hybrid Dual Generation SystemLoncin 608 four-stroke gasoline engine, optional 22/25/27 HP. Built-in 2500W generator, no frequent battery charging trouble, stable continuous operation.

✅ 1200mm Double Blade Cutting Deck, Electric Height AdjustmentCutting width 1200mm. Cutting height adjustable electrically between 1–20 cm, quick switch for different grass conditions. High mowing efficiency up to 7200 m²/h.

✅ 41 Widened Engineering Rubber Tracks, 60° Max ClimbingWide anti-slip crawler design, low center of gravity, excellent traction. Safely work on steep slopes, muddy ground, uneven hillsides where walk-behind mowers cannot reach.

✅ 500 Meters Long-Distance Remote ControlWireless remote control with high/low speed adjustment. Keep operators far from dangerous slopes, thorns and flying debris; greatly reduce safety risks.

✅ Split Dual Drive Power SystemDual 1000W split gearbox drive, flexible turning, strong power output, stable performance on rugged terrain.

✅ Complete Power Matching PackageComes with 2 pcs 20.5A 24V drive batteries plus 1 starter battery, electric start for easy ignition.

✅ Heavy-duty & Low MaintenanceRobust welded frame structure, reliable power assembly. Widely used for orchards, vineyards, hillside green belts, river slope vegetation management and farmland weeding.

Application Scenarios

✅ Hillside & steep embankment:Mow steep slopes, river banks, highway and railway side slopes ✅ Orchard & vineyard:Fruit orchards, vineyards, tea plantations, forest farms ✅ Municipal greening:Park green belts, scenic zones, reservoir protective slopes ✅ Farm & pasture:Pasture weeding, farmland boundary vegetation trimming ✅ Complex rugged terrain:Uneven wasteland, rocky land, swampy soft ground where manual & walk-behind mowers are hard to work


操作


使用场景


Technical Parameters

Item Specification
Cutting Width 1200mm (Double Blades)
Cutting Height 1cm–20cm (Electric Adjustment)
Power Type Hybrid Fuel-Electric, Manual Throttle, Dual Power Generation
Engine Power 22 / 25 / 27 HP, Gasoline
Engine Brand Loncin 608 Four-Stroke
Built-in Generator 2500W
Drive Power 1000W * 2 Split Transmission Gearbox
Drive Track 41 Widened Engineering Rubber Track
Built-in Battery 2 pcs Chaowei 20.5A 24V Battery + 1 pc 20.5A Starter Battery
Starting Method Electric Start
Max Climbing Angle 60 Degrees
Remote Control Range 500m, High & Low Speed Control
Travel Speed 0–6 km/h
Working Efficiency ≤7200 m²/h
Fuel Tank Capacity 12L
Engine Oil Capacity 1.6L / 2.4L
Max Fuel Consumption 5.2L / 6.8L per hour
Overall Dimension 16501730700 mm
Net Weight 370 kg
Package Size 17001820880 mm
Gross Weight (With Package) 470 kg


包装


我们的优势Using Guide

1. Pre-operation Check

  • Check fuel level, engine oil level and battery connection before startup.

  • Inspect rubber tracks, blades and transmission parts for damage or loose fasteners.

  • Confirm the remote controller battery is fully charged and signal connects normally.

  • Keep the working area clear of stones, branches, wires and obstacles.

2. Starting Steps

  1. Turn on the remote control power first, then turn on the machine main switch.

  2. Press the electric start button to start the Loncin four-stroke engine.

  3. Let the engine idle for 2–3 minutes for warm-up.

  4. Adjust cutting height electrically to your target height (1–20cm).

  5. Test forward, backward, turning and high/low speed function on flat ground before slope work.

3. Mowing Operation

  • Keep stable speed; avoid sharp turning at high speed especially on slopes.

  • Work along the contour line on steep slopes, do not operate vertically up and down extreme slopes.

  • Max climbing angle: 60°, do NOT exceed the limit.

  • If grass is too thick, reduce travel speed or make repeated passes.

  • Stop immediately if abnormal vibration, strange noise or loss of signal occurs.

4. Shutdown & Daily Maintenance

  1. Move the machine to flat ground, idle the engine for 1 minute.

  2. Cut off the throttle and shut down the engine.

  3. Turn off machine power and remote controller power.

  4. Clean grass debris on tracks, blade deck and radiator after each use.

  5. Check blade sharpness, track tension and battery status regularly.

  6. Store in dry, ventilated place; drain fuel if long-term storage.

⚠️ Safety Reminders

  • Operator must stay outside the slope danger zone within 500m remote range.

  • Do not work near people, livestock or buildings when blades are rotating.

  • Wear protective glasses and ear protection when operating.

  • Never touch rotating blades.

  • Do not use in rainy, wet and thunderstorm weather.


首图卖点

FAQ


Q1: What is the maximum slope this crawler mower can handle? 

A1: Max climbing capacity is 60 degrees. We suggest operating along the slope contour for better safety. Do not exceed the rated angle.


Q2: How far can the remote control reach? 

A2: Standard remote control distance is 500 meters in open areas. Obstacles like thick trees will shorten the signal range.


Q3: Can I adjust the grass cutting height? 

A3: Yes. Cutting height is electrically adjustable from 1 cm to 20 cm.


Q4: What engine is equipped on this machine? 

A4: Loncin 608 four-stroke gasoline engine, optional 22HP / 25HP / 27HP. It adopts hybrid fuel-electric dual generation system with built-in 2500W generator.


Q5: Is it suitable for orchard, vineyard and river bank slope? 

A5: Absolutely. It is widely used for hillside, orchard, farm, green belt, river embankment and complex terrain where walk-behind mowers cannot work safely.


Q6: What is the working efficiency? 

A6: Up to 7200 m² per hour under ideal grass and terrain condition. Actual efficiency depends on grass thickness and land condition.


FAQ Style Copy

Q: What is the difference between GLD-52DH and GLD-52YK?

A: GLD-52DH supports satellite navigation and automatic path planning, while GLD-52YK is a remote control only model. Both share the same cutting width, power, and battery specifications.


Q: How long is the remote control distance?

A: The remote control distance is up to 100 meters in an open environment.


Q: Can it work on slopes?

A: Yes, the machine has a climbing ability of ≥ 20°, making it suitable for sloped lawns.


Q: What is the cutting height range?

A: The cutting height is adjustable from 2cm to 10cm.


Q: Is it suitable for large lawns?
A: Yes, with a 52cm cutting width and 3000 m²/h working efficiency, it is suitable for large gardens, villas, and public green areas.


  +8618921887735
 +86-18921887735 / +86-13365182967
 No.66 Hexin Road, Yandu District, Yancheng Jiangsu China

Quick Links

Product Category

Send Us A Message
Copyright © 2026 Jiangsu Grande Machinery Manufacturing Co., Ltd. All rights reserved. Sitemap |  Privacy Policy    苏ICP备2023030502号-2